{"title":"SPC Performance","description":"\u003cp\u003e\u003cspan\u003eSPC Performance specializes in precision alignment and suspension geometry components for performance street and race vehicles. Their catalog of adjustable control arms, camber kits, caster correction brackets, and alignment tools gives drivers the ability to dial in suspension geometry beyond what factory components allow — critical for vehicles that have been lowered, modified, or taken to the track. SPC products are engineered for vehicles where alignment specs fall outside factory ranges due to suspension modifications, and are widely used by alignment shops, tuners, and motorsport teams to achieve optimal tire contact patch, handling balance, and tire wear. Made in the USA with precision-machined components, SPC Performance is the go-to brand for suspension geometry correction.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"spc-performance-honda-acura-rear-adjustable-arms-set-of-5","title":"SPC Performance Honda\/Acura Rear Adjustable Arms (Set of 5)","description":"Use this five (5) link set to adjust camber, toe, set-back, and track width on your Accord, TSX, and many more Honda \u0026amp; Acura models. Whether you are modifying your suspension for the track or getting your alignment angles back after adjusting ride height, this is the most complrehensive kit for you. Honda's multilink set up is susceptible to binding if you try to change the length of just one of the arms. This kit corrects that and will let you set your suspension where you want it without binding. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605403741,"sku":"SPC67289","price":691.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/4052e9c491c4b151bba71fb57ab78f42.jpg?v=1781294541"},{"product_id":"spc-performance-2016-honda-civic-replacement-lower-ball-joint-does-not-fit-civic-type-r","title":"SPC Performance 2016+ Honda Civic Replacement Lower Ball Joint (Does Not Fit Civic Type R)","description":"Replace your worn or damaged factory lower ball joint on the front of the 10th generation Civic or late model CR-V with this replacement ball joint from SPC. This ball joint uses high quality components for a long service life. Need front camber change?Consider our line of camber adjustment ball joints; 67381 for negative camber or 67382 for positive camber. NOTE: DOES NOT FIT CIVIC TYPE R. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605436509,"sku":"SPC12715","price":97.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/78975f1a927e85f9c38bcbc95874c483.jpg?v=1781294542"},{"product_id":"spc-performance-xaxis-bushing-upgrade-kit-for-25470-25480","title":"SPC Performance xAxis Bushing Upgrade Kit for 25470 \u0026 25480","description":"Upgrade your older SPC arms to the latest design with this complete bushing retrofit kit. These xAxis joints feature free pivoting inner balls to maximize droop travel and are greased \u0026amp; booted to protect against contaminants. The bonded rubber outer shell is designed to maintain factory noise, vibration, and harshness (NVH) measurements. This kit includes four bushings, washers, and the press tool needed to install the new bushings in your arms. On a budget? We still sell our SpecRide bushing kit for these arms, see part number 25476.  Note: This kit requires access to a shop press to install. These bushings will only fit arms from mid-2012 and newer. Please contact SPC tech support with any questions. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605469277,"sku":"SPC25022","price":220.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/6b0877b8a5016b22156ebdf6124d25f9.jpg?v=1781294542"},{"product_id":"spc-performance-2018-jeep-jl-assorted-camber-slv","title":"SPC Performance 2018+ Jeep JL Assorted CAMBER SLV","description":"Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to the knuckle. Simply determine what degree offset sleeve is already in the knuckle and replace it with a new offset. This six (6) piece set is perfect for the shop that sees a lot of Jeeps or for the installer who does not know what change will be needed. SPC's camber sleeves feature our hex chromate free finish certified to a 700 hour salt spray test. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605665885,"sku":"SPC23400","price":255.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/24ea392780414f4fa3f8d6a515768e25.jpg?v=1781294547"},{"product_id":"spc-performance-09-17-ford-expedition-adjustable-rear-camber-arm","title":"SPC Performance 09-17 Ford Expedition Adjustable Rear Camber Arm","description":"Add more adjustment to the rear suspension on your Ford Expedition with this fully adjustable camber control arm. This arm replaces the factory non-adjustable upper control arm and allows easy on-car adjustment to dial in the camber exactly where you want it. The bonded rubber bushing retains factory ride and vibration quality while providing a long service life.","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605698653,"sku":"SPC67275","price":160.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/1192e4d72ec785387c24750aafba3223.jpg?v=1781294547"},{"product_id":"spc-performance-ford-ranger-front-upper-adjustable-arms-pr","title":"SPC Performance Ford Ranger Front Upper Adjustable Arms (PR)","description":"Improve droop travel, drivability and tire wear with SPC's adjustable front upper control arms. Fit bigger tires without rubbing fenders. Featuring a greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles on standard height vehicles as well as lifted and lowered vehicles while maintaining factory ride quality. SPC's tube and plate arms are made in our facility in Colorado. Their proven design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.  - Get more droop travel: Don't let the OE ball joints or mono-ball articulation limit your travel. SPC joints are oversized and provide 80deg of travel.  - Get your drivability and tracking back: Your truck may have started to 'wander' after you lifted it. That is because you lost caster. Install SPC arms and get your 'drivability' back by putting your alignment in specification.  - Improve tire clearance: Are youroversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with the OE adjustments on the lower arm, allow you to dial in alignment spcs at the same time that you move the tire forward\/outward in the wheel well by up to 1\".  NOTE: For Rangers with aluminum knuckles ONLY California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605764189,"sku":"SPC25670","price":9999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/cc808fc918947261dd0d71cfe2b26a55.jpg?v=1781294548"},{"product_id":"spc-performance-98-07-toyota-land-cruiser-100-series-front-camber-bolt-kit","title":"SPC Performance 98-07 Toyota Land Cruiser 100 Series Front Camber Bolt Kit","description":"The Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUVs are frequently \"frozen\" and do not allow for adjustment. Remove the bolt assembly and replace it with an SPC cam kit to get up to +-1.50deg camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605731421,"sku":"SPC25385","price":36.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/2e7dc64d7bda2b507217213be30cdb7b.jpg?v=1781294548"},{"product_id":"spc-performance-11-17-dodge-challenger-rwd-cam-bolt-kit","title":"SPC Performance 11-17 Dodge Challenger RWD Cam Bolt Kit","description":"Add permanent adjustability to the front end of the rear wheel drive Dodge Charger, Challenger, and Chrysler 300 vehicles with this cam bolt kit. The kit includes one camber cam and one caster cam to add adjustment to one side of the vehicle and gives +-1.0deg camber adjustment and +-2.0 caster adjustment. The bolts offer the best corrosion protection available with a hex chromate free finish that is certified to meet 700 hr salt spray test requirements. SPC offers several alignment options for your LX platform vehicle. If you want more change and an easier install, consider the 66045 for change that can be driven from the upper control arm. You will need SPC's punch tool #74920 or a rotary file like #85130 to slot the factory bolt holes. Replace Mopar #68142226AB with this kit. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605928029,"sku":"SPC66038","price":76.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/4bacc9708507a031dfc4cc53e9c5f7fa.jpg?v=1781294548"},{"product_id":"spc-performance-05-07-ford-five-hundred-08-09-ford-taurus-rear-upper-ball-joint","title":"SPC Performance 05-07 Ford Five Hundred \/ 08-09 Ford Taurus Rear Upper Ball Joint","description":"Replace your worn out upper ball joints on the rear suspension on many Ford, Lincoln, and Mercury AWD vehicles with these replacement ball joints from SPC. Ford makes you buy the whole knuckle to replace this joint, but you can save time and money by simply replacing the ball joint instead. Need camber adjustment as well? Check out SPC p\/n 67690 for a camber adjustment ball joint that offers +-1.25deg of change. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519605895261,"sku":"SPC12710","price":75.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/4f897fbce83677e7b242613277a05116.jpg?v=1781294548"},{"product_id":"spc-performance-gm-heavy-duty-truck-tool","title":"SPC Performance GM Heavy Duty Truck Tool","description":"This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks. The tool surrounds the entire perimeter of each cam to provide a no slip means to reach the hard-to-reach and often rusty OE cams. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606059101,"sku":"SPC45945","price":35.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/1b7140b9a2621386b0033b9fc8853875.jpg?v=1781294550"},{"product_id":"spc-performance-99-11-porsche-911-04-16-boxster-06-16-cayman-rear-camber-toe-bolt-adjustment-kit","title":"SPC Performance 99-11 Porsche 911 \/ 04-16 Boxster \/ 06-16 Cayman Rear Camber\/Toe Bolt Adjustment Kit","description":"Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and provide the same amount of adjustment as the factory part it is replacing. SPC uses hex chromate free finish and offers a 700 hr salt spray test for the best corrosion protection available. One kit is used for each side of the vehicle. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606616157,"sku":"SPC72645","price":24.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/63ddbb436532d9b51b533e70f6625d8e.jpg?v=1781294596"},{"product_id":"spc-performance-2015-ford-mustang-rear-adjustable-camber-arm","title":"SPC Performance 2015+ Ford Mustang Rear Adjustable Camber Arm","description":"Add a little horsepower, use grippy tires, launch hard, and take a corner at 1.5 G's. You need an adjustable rear control arm to optimize your tire contact by adjusting your camber. Be confident your arm is proven and reliable for the \u0026gt;1,000 pounds of force that it will be loaded with over and over again as you put your Mustang to the test. Designed, engineered, tested, and assembled in Colorado, SPC's forged aluminum link will provide; -3 to +2 degrees of camber adjustment, reduced weight vs the OE armand exceed its strength. SPC's adjustable arm features high rate rubber bushings to maintain OE noise, vibration, and harshness (NVH) and has a 1.5\" hexed eccentric insert at the knuckle end of the arm to easily adjust camber without removing the tire. All hardware is included and features hex chromate free finish (certified to 700 salt spray test standards) for a long rust free life. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606583389,"sku":"SPC72370","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/e4596957ebf6b42c59318d59f8d452a9.jpg?v=1781294595"},{"product_id":"spc-performance-acura-rdx-rear-adjustable-arm-and-toe-cam-set","title":"SPC Performance Acura RDX Rear Adjustable Arm and Toe Cam Set","description":"Make rear camber adjustable on the Acura RDX with this adjustable lower control arm and replacement toe cam bolt kit from SPC. The adjustable rear lower control arm will provide +-2.0deg camber and teh extended range OE replacement toe cam will allow you to bring toe back into specification with +-2.0deg of change. Whether you need to improve handling or decrease tire wear issues, this is the kit for you. Use rotary file #85130 to extend the factory toe slot and take advantage of the full change provided by teh SPC's extended toe cam bolt. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606517853,"sku":"SPC67595","price":182.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/8cfe34961def3906b052d1d0347ebcc3.jpg?v=1781294596"},{"product_id":"spc-performance-09-17-audi-a4-rs4-s4-09-16-audi-a5-s5-front-adj-upper-multi-link-control-arm-kit","title":"SPC Performance 09-17 Audi A4\/RS4\/S4 \/ 09-16 Audi A5\/S5 Front Adj Upper Multi Link Control Arm Kit","description":"Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81361. For the right hand (RH) side, use part number #81362.  SPC Arms Feature:  Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts included  Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606419549,"sku":"SPC81363","price":899.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/a0883df724fb69e2ac4ef447241c2514.jpg?v=1781294595"},{"product_id":"spc-porsche-adjustable-trailing-link-pair","title":"SPC Porsche Adjustable Trailing Link Pair","description":"Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 997 with this pair of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with a hard black anodize finish, they adjust with an easy to reach threaded adjuster and maintain factory ride with SPC's xAxis sealed flex joints which eliminate binding and bushing compliance. When you install these links on the front, you will be able to adjust caster +-1.25deg. SPC has maintained the OE form sothat you will be able to reuse your factory air deflector without modification. When you install these arms on the rear you will be able to adjust set-back +-1\/2 inch (+-13mm). Designed for street use as well as the rigors of the track, these arms will letyou put your alignment angles where you want them for the way you drive. Need camber adjustment? Consider SPC's adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606485085,"sku":"SPC72630","price":489.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/2dd5b49d1b8c10fd89a5ef801bb6edf0.jpg?v=1781294595"},{"product_id":"spc-performance-00-09-subaru-outback-rear-toe-cam-bushing-kit","title":"SPC Performance 00-09 Subaru Outback Rear Toe\/Cam \u0026 Bushing Kit","description":"Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606648925,"sku":"SPC67668","price":53.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/b04c83e770e78db1f056fce391a551fe.jpg?v=1781294595"},{"product_id":"spc-performance-gm-truck-suv-front-control-arms-pr","title":"SPC Performance GM Truck\/SUV Front Control Arms (PR)","description":"Get your GM truck or SUV's front camber or caster back in spec with these fixed offset upper control arms. Whether you lift your rig 3\" or lower it 1\" it is going to lose caster. The OE adjusters do not provide enough change, so install SPC offset arms for +2deg caster change and then use the OE cams to dial your alignment in and get your drivability back. These arms feature:   *Fully forged contruction for maximum strength.   *Booted and greasable ball joints that will last.    *SPC's xAxis technology with a twist. The xAxis sealed flext joints used in these arms provide a free pivot for droop and misalignment that OE caster and camber adjustments will not bind the joint. These cross axis ball joints also have rubber isolation to retain OE bushing values for Noise, Vibration, and Harshness (NVH).   Kit includes arms for both the right and left hand side. It can be used for lifted and lowered applications, if you drop your ride height more than 1\" it will start to gain caster very quickly. These arms will still work for you, swap these arms left to right and get -2deg caster change if you need it. Need to replace the OE adjusters? Consider SPC's p\/n 86375 replacement cams, p\/n 86325 replacement alignment pins and p\/n 86320 alignment locking plates. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606550621,"sku":"SPC86470","price":549.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/fdfeccf83a7638370f3e76190513abae.jpg?v=1781294596"},{"product_id":"spc-performance-98-08-audi-a4-s4-rs4-98-05-vw-passat-front-upper-multi-link-control-arm-kit","title":"SPC Performance 98-08 Audi A4\/S4\/RS4 \/ 98-05 VW Passat Front Upper Multi Link Control Arm Kit","description":"Adjust front camber and caster +-1.5deg on the Audi B5\/B6\/B7 and C5 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushigns maintain factory ride, handling and noise, vibration, \u0026amp; harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81351. For the right hand (RH) side, use part number #81352.  SPC Arms Feature:  Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts included   Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606714461,"sku":"SPC81353","price":899.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/42512461b9868b223d5b7a374667fa48.jpg?v=1781294595"},{"product_id":"spc-performance-mini-rear-toe-adjustment-tool","title":"SPC Performance MINI Rear Toe Adjustment Tool","description":"Quickly and easily adjust rear toe on all MINI vehicles with this tool from SPC. Simply use your 1\/2\" drive socket wrench to drive change on the rear toe adjustment brackets on these MINI vehicles and save time on every alignment. Equivalent to BMW tool# 324200. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606747229,"sku":"SPC87566","price":67.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/03ea799ffa98df1ddcd25282b2079684.jpg?v=1781294595"},{"product_id":"spc-performance-bmw-rear-toe-adjustment-tool","title":"SPC Performance BMW Rear Toe Adjustment Tool","description":"Quickly and easily adjust rear toe on BMW 3-Series (E46) and Z4 models with this tool from SPC. Simply use your 1\/2\" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW vehicles and save time on every alignment. Equivalent to BMW tool# 323030 and 83300493306. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519606812765,"sku":"SPC87565","price":75.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/0d8012d9083a7e9eaf6542c6d813f1ff.jpg?v=1781294595"},{"product_id":"spc-performance-2016-honda-civic-front-adjustable-lower-ball-joint-1-0-deg-does-not-fit-type-r","title":"SPC Performance 2016+ Honda Civic Front Adjustable Lower Ball Joint (-1.0 deg) (Does Not Fit Type R)","description":"Use this adjustable ball joint to get back to specification on the Honda Civic, CR-V, and Accord. Whether you are tracking your vehicle or need some change to stop tire wear, this maintenance free sealed ball joint will do the job. SPC's ball joint willgive up to -1deg change on the Civic and up to -0.5deg on the taller struted CR-V and Accord. Need positive change? Check out part number 67382. NOTE: DOES NOT FIT CIVIC TYPE R. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607173213,"sku":"SPC67381","price":124.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/cf87f62f98080a6b3aecbebe5110551a.jpg?v=1781294600"},{"product_id":"spc-performance-04-08-acura-tl-tsx-upper-setback-control-arm","title":"SPC Performance 04-08 Acura TL \/ TSX Upper Setback Control Arm","description":"Use this arm to affect setback and track width. The arm's adjustability will allow you to remove bind as you adjust camber with the other arms. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607140445,"sku":"SPC67293","price":146.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/f72a27a328839c8b1abeb6ba321ec528.jpg?v=1781294601"},{"product_id":"spc-performance-2015-acura-tlx-rear-adjustable-arm-and-toe-cam-set","title":"SPC Performance 2015+ Acura TLX Rear Adjustable Arm and Toe Cam Set","description":"Fully adjust rear camber, setback, and toe on many latemodel Honda and Acura vehicles with this alignment kit from SPC. This kit includes two (2) adjustable control arms and a toe cam bolt so you can compensate for ride height changes, enhance on-track performance, or correct for suspension damage. The 2015 \u0026amp; up FWD TLX uses a dynamic toe adjustment system that makes traditional suspension alignment difficult. Use this kit to dial in your rear alignment and take full advantage of your advanced suspension design. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607238749,"sku":"SPC67560","price":318.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/5eb814a407af319ad6799d646b03b657.jpg?v=1781294600"},{"product_id":"spc-performance-2013-mazda-cx-5-rear-camber-toe-kit","title":"SPC Performance 2013+ Mazda CX-5 Rear Camber\/Toe Kit","description":"Make rear camber on the Mazda CX-5 adjustable for life with this adjustable lower control arm and extended range toe cam kit. The remove and replace camber arm provides +-3.0deg of change and the included extended range toe cam will get toe back to specification through the entire camber range. Whether you need to adjust to improve handling or decrease tire wear issues, this is the kit for you. Use rotary file #85130 to extend the factory toe slot and take advantage of the full throw provided by the SPC's extended toe cam bolt. Also includes an optional bracket for use with '17 \u0026amp; newer models that include an air dam on the lower control arm. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607304285,"sku":"SPC67416","price":178.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/1e87ab44b4f6b72f2c0c89f41416cfe3.jpg?v=1781294600"},{"product_id":"spc-performance-16-21-honda-civic-rear-toe-cam-kit","title":"SPC Performance 16-21 Honda Civic Rear Toe Cam Kit","description":"Extend your toe adjustment range on the rear of many popular Honda models. SPC's extended toe cam kit will allow you to get a full +-2.5deg of toe change. This cam bolt features a hex chromate free finish that offers a 700hr salt spray test for the best corrosion protection available.One kit is used for each side of the vehicle. The OE slot will need to be extended to take advantage of the full range of SPC's cam. Use SPC rotary file 85130 or similar. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607271517,"sku":"SPC67477","price":29.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/f007600cf4f47affd28c46c891b798af.jpg?v=1781294600"},{"product_id":"spc-performance-16-17-honda-civic-ctr-adjustable-aluminum-rear-camber-arm","title":"SPC Performance 16-17 Honda Civic \u0026 CTR Adjustable Aluminum Rear Camber Arm","description":"Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustment of +-3.0deg camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications this is the arm for you. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607369821,"sku":"SPC67476","price":219.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/bfff539844d5ccae32c4201cf9c12fd7.jpg?v=1781294601"},{"product_id":"spc-performance-2013-mazda-cx-5-rear-toe-cam-bolt-kit","title":"SPC Performance 2013+ Mazda CX-5 Rear Toe Cam Bolt Kit","description":"Replace your frozen toe cams on many Mazda vehicles while also adding more adjustability with this extended range toe adjustment kit from SPC. This cam bolt provides +-2.5deg of adjustment through the unique stepped cam washer included in the kit. Use rotary file #85130 to extend the factory toe slot to take full advantage of the extended range on this cam bolt. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607337053,"sku":"SPC67417","price":37.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/a45c0367265037c0609536d18c9221c6.jpg?v=1781294601"},{"product_id":"spc-performance-2016-honda-civic-front-adjustable-lower-ball-joint-1-0-deg-does-not-fit-type-r-1","title":"SPC Performance 2016+ Honda Civic Front Adjustable Lower Ball Joint (+1.0 deg) (Does Not Fit Type R)","description":"Use this adjustable lower ball joint to get back to specification on the Honda Civic, CR-V, and Accord. Whether you are tracking your vehicle or need some change to stop tire wear, this maintenance free sealed ball joint will do the job. SPC's ball joint will give up to +1deg change on the Civic and up to +0.5deg change on the taller struted CR-V and Accord. Need negative change? Check out part number 67381. NOTE: DOES NOT FIT CIVIC TYPE R California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607402589,"sku":"SPC67382","price":124.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/f78f1f01a6f48ff1710829fb210a7164.jpg?v=1781294601"},{"product_id":"spc-performance-04-08-acura-tl-tsx-lower-setback-control-arm","title":"SPC Performance 04-08 Acura TL \/ TSX Lower Setback Control Arm","description":"Use this arm to affect setback and toe. These links have bonded rubber bushings to maintain factory levels of noise vibration and harshness (NVH). California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607435357,"sku":"SPC67292","price":154.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/0593e14adcbb0b90a065199a76692cc2.jpg?v=1781294601"},{"product_id":"spc-performance-04-08-acura-tl-tsx-lower-camber-lateral-link","title":"SPC Performance 04-08 Acura TL \/ TSX Lower Camber Lateral Link","description":"Use this arm to affect setback, camber, and track width. This arm ties into the knuckle directly below the 67290. Adjusting this in unison with the upper link will take bind out of the system. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519607500893,"sku":"SPC67291","price":115.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/f73025c7d76dc7e54338d6b8b9460fae.jpg?v=1781294601"},{"product_id":"spc-performance-2018-honda-odyssey-rear-camber-adjuster","title":"SPC Performance 2018+ Honda Odyssey Rear Camber Adjuster","description":"Add camber adjustment to the rear of your Honda Odyssey with SPC's patented camber bolt. Simply replace the rear lower control arm bolt with SPC's bolt and get +-0.5deg of camber change to get the vehicle back within specification. SPC uses a hex chromate free finish and offers a 700hr salt spray test for hte best corrosion protection available. US Patent Nos. 8,544,861 B2 . 8,469,375 B2 . D783,393 China Patent No. 201630012294.X California ResidentsWARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519608057949,"sku":"SPC67567","price":22.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/0e24b0f183fdd3772cc26458a8c72a12.jpg?v=1781294618"},{"product_id":"spc-performance-05-10-jeep-grand-cherokee-adjustable-ball-joint-1-25deg","title":"SPC Performance 05-10 Jeep Grand Cherokee Adjustable Ball Joint (1.25deg.)","description":"Add camber adjustment to your lifted Jeep Grand Cherokee or Commander with the highest quality ball joint on the market! This joint is specifically designed to work with raised suspensions and features:  *Induction hardened and oversized 18mm stud for extreme strength and high durability  *700 hour salt spray resistant coating for long life  *Hybrid 2-piece race and internal spring compensate for wear over time  *Fully sealed greasable design to protect from the elements  *80deg of articulation to maximize travel without binding vs 66deg on the factory joint.  * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519665565789,"sku":"SPC23420","price":248.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/e232ea88b8cfc22e8da6811f6083bd5e.jpg?v=1781296598"},{"product_id":"spc-performance-toyota-rav4-rear-adjustable-toe-arm","title":"SPC Performance Toyota RAV4 Rear Adjustable TOe Arm","description":"Many of the early Toyota RAV4 models no longer have rear toe adjustment due to a factory recall. This arm fits these early recalled models as well as the later models. This simple to replace lower control arm provides a full +-3.0deg of toe adjustment to get tire wear and adjustability back to when the vehicle was new. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519669563485,"sku":"SPC67806","price":168.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/a18ae32d15b51a8c9b185a562d71d9fa.jpg?v=1781296725"},{"product_id":"spc-performance-hyundai-kia-cam-bolt-kit","title":"SPC Performance Hyundai\/Kia CAM BOLT KIT","description":"Replace damaged or corroded factory alignment adjusters on the rear suspension of many Hyundai and Kia SUV models with these cam bolts from SPC. These bolts are designed to provide the same adjustment range as the original components while providing superior corrosion and salt resistance with SPC's 700 hour salt spray tested coating. This kit includes two bolts: a replacement camber bolt and toe bolt to restore adjustability for one side of the vehicle. Order two kits to restore adjustment to the complete rear suspension. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519673921629,"sku":"SPC84100","price":49.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/b11c0584bffa08ea7f19f4e8131b0693.jpg?v=1781296896"},{"product_id":"spc-performance-toyota-4runner-rear-lower-control-arms","title":"SPC Performance Toyota 4Runner Rear Lower Control Arms","description":"This pair of lower control arms are direct replacements for weak or bent factory units. Made of 3\/16\" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis sealed flex joints in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Have you lifted your 3rd Gen 4Runner and want to get your drivability back? Check out SPC's 25460 adjustable front upper control arms! California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519681654877,"sku":"SPC25945","price":367.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/07e9afc5375757d0a30dcbb1e517bf71.jpg?v=1781297148"},{"product_id":"spc-performance-chevrolet-camaro-el-camino-malibu-2nd-gen-f-body-upper-adjustable-control-arm","title":"SPC Performance Chevrolet Camaro \/ El Camino \/ Malibu 2nd Gen F-Body Upper Adjustable Control Arm","description":"This unique, patented design provides the most adjustability and best clearance of any arm available for the many popular '70-'81 GM 'F' Body and additional applications. Sold as a pair, these forged steel adjustable arms come with ball studs that are 1\/2\" taller than stock to improve camber curve. Dial in some caster combined with the ability to adjust camber, yields a truly 'modern' feeling suspension. The ball joints are greaseable and fully rebuildable. Additionally, OE length and 1\/4\" extended studs are also available to fine tune ride characteristics and maximize specific suspension geometry. Consider combining upper control arms with available lower control arms to complete the transformation of any Pro Touring, Track Ready, or daily driven street use American Muscle car. Sold as pairs. US Patent No. 9,751,370.","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519681753181,"sku":"SPC97130","price":1095.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/e9a29fba235e3d4e4d6990f8cbd4269b.jpg?v=1781297149"},{"product_id":"spc-performance-xaxis-replacement-bushing-kit-for-spc-arms-p-n-25455-25470-25480-25680","title":"SPC Performance xAxis Replacement Bushing Kit for SPC Arms (P\/N: 25455 \/ 25470 \/ 25480 \/ 25680)","description":"Replace the xAxis bushings on your control arms using this kit from SPC. This kit includes enough xAxis bushings to service two control arms and includes a press tool. Note that you will need access to a shop press to install these parts. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519695745117,"sku":"SPC25030","price":220.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/e74c919725a06a159c03842185517800.jpg?v=1781297581"},{"product_id":"spc-performance-dodge-1500-cam-bolt-kit2","title":"SPC Performance Dodge 1500 CAM BOLT KIT(2)","description":"Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory cam, +-2deg for camber and caster. This pair of cam bolts is enough to replace the bolts on one lower control arm. If you need more change than the OE cams give you, use SPC's adjustable upper ball joint p\/n 23940. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519695777885,"sku":"SPC82420","price":85.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/4dfdc2d9ffbd5999342f6c5d92886e2e.jpg?v=1781297582"},{"product_id":"spc-performance-14x16mm-slot-punch-tool","title":"SPC Performance 14x16mm Slot Punch Tool","description":"Turn any 9\/16\" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5\" [38mm]. Use this tool to quickly and cleanly slot subframe or control arm bracket holes allowing adjustment where the factory didn't provide any options. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519695810653,"sku":"SPC74920","price":285.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/a4a93e63b42847dc42684ec38119a927.jpg?v=1781297581"},{"product_id":"spc-performance-audi-b9-front-upper-control-arm-set-left-right-pair","title":"SPC Performance Audi B9 Front Upper Control Arm Set Left \u0026 Right Pair","description":"Adjust front camber and caster +-1.5deg on the Audi B9 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, \u0026amp; harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. For the left hand (LH) side, use #81381. For the right hand (RH) side, use part number #81382. Want to be able to adjust both sides? Use part #81383.  Forged 6061-T6 Aluminum construction for maximized strength at minimum weight  OE style, maintenance free, bootedball joints  Large 18mm threaded adjuster links  Replacement pinch bolts included California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519745880157,"sku":"SPC81383","price":899.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/ad02d9fa3a021a1096c3ba21cbb695e2.jpg?v=1781299173"},{"product_id":"spc-performance-xaxis-replacement-bushing-kit-for-spc-arms-pn-25460","title":"SPC Performance xAxis Replacement Bushing Kit for SPC Arms (PN: 25460)","description":"Replace your xAxis bushings in your control arms using this kit from SPC. This kit includes enough xAxis bushings to service two control arms and includes a press tool. Note that you will need access to a shop press to install these parts. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519771013213,"sku":"SPC25031","price":255.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/bf0d19c7180ac11fa3b1ab0b63de426d.jpg?v=1781299901"},{"product_id":"spc-performance-2018-jeep-wrangler-jl-front-caster-and-pinion-angle-cams","title":"SPC Performance 2018+ Jeep Wrangler JL Front Caster and Pinion Angle Cams","description":"Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide +-1.5deg of adjustment. NOTE: You will need to slot the axle bracketsot get the adjustment you need, use SPC rotary file set 85130 or similar. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519803387997,"sku":"SPC82375","price":48.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/497bb86877b70f301f2eece83c557269.jpg?v=1781300859"},{"product_id":"spc-performance-09-17-audi-a4-s4-rs4-09-16-audi-a5-s5-front-adj-upper-racing-control-arm-kit","title":"SPC Performance 09-17 Audi A4\/S4\/RS4 \/09-16 Audi A5\/S5 Front Adj Upper Racing Control Arm Kit","description":"Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B8 and C7 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance joint. You will feel the difference in handling.  SPC Arms feature:  Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts  xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance joint   Don't need the added benefits of our performance arms? Use SPC arms with OE type bushings - part #81363 for two sets of arms to correct both sides of the vehicle, #81361 for the left side, or part #81362 for the right.  Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354.  Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519806599261,"sku":"SPC81368","price":1095.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/8826c0e32d71541db6722eb471a49b5e.jpg?v=1781300988"},{"product_id":"spc-performance-14-bmw-2-series-f45-f46-14-mini-cooper-clubman-f55-f56-rear-adj-control-arm","title":"SPC Performance 14+ BMW 2 Series (F45\/F46) \/ 14+ Mini Cooper\/Clubman (F55\/F56) Rear Adj Control Arm","description":"Get +-3deg of camber adjustment on your late model BMW or Mini with this rear camber arm from SPC. Whether you need to improve tire life, add aggressive camber settings for the track, or just want a better handlign car for the street, this is the arm for you. The high strength steel arm features fully forged ends and high durometer rubber bushings for long life, minimized noise, vibration, and harshness (NVH), and great handling characteristics. The easy to adjust turnbuckle and the remove \u0026amp; replace designmakes this a hassle free install with lifetime adjustability. Sold each, order two to add camber adjustability to both sides of the car. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519813054557,"sku":"SPC67108","price":147.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/591195f79f34a24533bffbebb2019301.jpg?v=1781301185"},{"product_id":"spc-performance-racing-audi-and-vw-adjustable-control-arms","title":"SPC Performance Racing Audi and VW Adjustable Control Arms","description":"Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C6 and D3 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling.  SPC Arms Feature:  Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts  xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint   Don't need the added benefits of our performance arms? Use SPC arm with OE type bushings - part #81373 for two sets of arms to correct both sides of the vehicle, #81371 for the left side, or part #81372 for the right.  Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354.  Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519813349469,"sku":"SPC81378","price":1095.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/315b372167ca043c80cb1d853ec64ae4.jpg?v=1781301208"},{"product_id":"spc-performance-09-17-audi-a4-rs4-s4-09-16-audi-a5-s5-front-upper-multi-link-control-arm-left","title":"SPC Performance 09-17 Audi A4\/RS4\/S4 \/ 09-16 Audi A5\/S5 Front Upper Multi Link Control Arm - Left","description":"Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, \u0026amp; harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81362. Want to be able to adjust both sides? Use part number #81363.  SPC Arms Feature:  Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts included  Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519817478237,"sku":"SPC81361","price":449.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/7b4520860bdc40fb97cac0055634bee8.jpg?v=1781301376"},{"product_id":"spc-performance-porsche-rear-toe-link","title":"SPC Performance Porsche Rear Toe Link","description":"Adjust toe +-3deg with this pair of adjustable toe links. SPC's forged aluminum construction avoids any weight penalty while maintaining factory strength. The integrated ball joint means smooth bind free articulation and no maintenance required. Sold as pairs. Need more adjustment options? Consider our camber arms, SPC PN 72610, and our caster\/setback arms, SPC PN 72630. These are also available as a complete performance package: see SPC PN 72600. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519817347165,"sku":"SPC72640","price":599.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/ffeeb2b99d8592c097532dafb87cc62f.jpg?v=1781301375"},{"product_id":"spc-performance-porsche-996-997-981-987-rear-performance-kit-6-arm-set","title":"SPC Performance Porsche 996\/997 \u0026 981\/987 Rear Performance Kit 6-arm set","description":"Get the optimum track set-up with SPC's 6-arm set. This set includes 2 each of the 72610 adjustable camber arms, 72630 adj. caster\/setback arms, and 72640 adj. rear toe arms. With aggressive handling and maximum G's, track vehicles require the best adjustment and extra strength vs the OE arm. These aluminum forged arms give you a complete solution for your track-ready 996\/997 or 981\/986\/987. Note: Rear suspension fitment excludes vehicles with Xenon headlamp option.","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519817379933,"sku":"SPC72600","price":2039.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/c79ea61431461a4a8f9ed0fa545389ee.jpg?v=1781301376"},{"product_id":"spc-performance-chevrolet-gmc-c10-truck-adjustable-control-arms-pair","title":"SPC Performance Chevrolet\/GMC C10 Truck Adjustable Control Arms (Pair)","description":"This unique, patented design provides the most adjustability and best clearance of any arm available for the many popular '71-'91 GM Pickup and SUV applications. Sold as a pair, these forged steel adjustable arms come with ball studs that are 1\/2\" taller than stock to improve camber curve. Dial in some caster combined with the ability to adjust camber, yields a truly 'modern' feeling suspension. The ball joints are greaseable and fully rebuildable. Additionally, OE length and 1\/4\" extended studs are also available to fine tune ride characteristics and maximize specific suspension geometry. Consider combining upper control arms with available lower control arms to complete the transformation of any Pro Touring, Track Ready, or daily driven street use American Muscle car. Sold as pairs. US Patent No. 9,751,370.","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519817445469,"sku":"SPC97180","price":1095.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/7b543d077f40d08aeb9d3fec396fb7aa.jpg?v=1781301376"},{"product_id":"spc-performance-09-17-audi-a4-rs4-s4-09-16-audi-a5-s5-front-upper-multi-link-control-arm-right","title":"SPC Performance 09-17 Audi A4\/RS4\/S4 \/ 09-16 Audi A5\/S5 Front Upper Multi Link Control Arm - Right","description":"Adjust front camber and caster +-1.5deg on the Audi B8 and C7 platforms with these forged aluminum control arms from SPC. OE syle booted ball joints and bonded rubber bushings maintain factory ride, handling, and noise, vibration, \u0026amp; harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81361. Want to be able to adjust both sides? Use part number #81363.  SPC Arms Feature:  Forged 6061-T6 Aluminum construction formaximized strength at a minimum weight  OE style, maintenance free, booted ball joints  Large 18mm threaded adjuster links  Replacement pinch bolts included  Need to replace the ball joint boots on these arms? We have replacement kitsavailable! Part No. 81354. California Residents WARNING","brand":"CALIBER CO.","offers":[{"title":"Default Title","offer_id":44519817740381,"sku":"SPC81362","price":449.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/3838\/8573\/files\/5ae53d1689a88483dcd467f75f01db89.jpg?v=1781301376"}],"url":"https:\/\/www.hicaliberco.com\/collections\/spc-performance.oembed","provider":"CALIBER CO.","version":"1.0","type":"link"}